search

ATI Technologies RADEON 7000 Guía de instalación Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
HP-UX Configuration
ATI RADEON 7500 PCI Graphics Controller Installation Guide
27
Section “Device”
Identifier “ATI Radeon 7500 QW(0) Connector 1”
DeviceFile “/dev/gvid0”
EndSection
Section “Device”
Identifier “ATI Radeon 7500 QW(0) Connector 2”
DeviceFile “/dev/gvid0”
Screen 1
EndSection
Section “Device”
Identifier “ATI Radeon 7500 QW(1) Connector 1”
DeviceFile “/dev/gvid1”
EndSection
The first device, ATI Radeon 7500 QW(0) Connector 1 is the first screen on the first device. The second
device, ATI Radeon 7500 QW(0) Connector 2 is the second screen on the first device. Note that it has the
Screen 1 field, which selects the second video output on the graphics card. The third device, ATI Radeon
7500 QW(1) Connector 1 is the first screen on the second device.
Once the Device sections are defined, you can define the Screen section, which maps a screen to a physical
device. The Screen sections use the Identifier field that was defined for each of the Device sections. The
three Screen sections for this example are as follows:
Section Screen
Identifier “Screen 0-1”
Device “ATI Radeon 7500 QW(0) Connector 1”
Monitor “Monitor 0”
# Include other Screen info here, including other SubSections
EndSection
Section Screen
Identifier “Screen 0-2”
Device “ATI Radeon 7500 QW(0) Connector 2
Monitor “Monitor 0”
# Include other Screen info here, including other SubSections
EndSection
Section Screen
Identifier “Screen 1-1”
Device “ATI Radeon 7500 QW(1) Connector 1”
Monitor “Monitor 0”
# Include other Screen info here, including other SubSections
EndSection
The first Screen section maps the screen Screen 0-1 to the physical device ATI Radeon 7500 QW(0)
Connector 1. The second Screen section maps the screen Screen 0-2 to the physical device ATI Radeon 7500
QW(0) Connector 2. The third Screen section maps the screen Screen 1-1 to the physical device ATI Radeon
7500 QW(1) Connector 1.
Once you have the Screen sections set up, you can set up the ServerLayout section. The ServerLayout
section uses the Identifier field that was defined for each of the Screen sections. The ServerLayout section
describes all of the screens used by the Xserver. The ServerLayout section for this example is as follows:
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29

Comentarios a estos manuales

Sin comentarios
  • PS Motor Manet Water Proof Ultracker Muchmore American Recorder Technologies
  • Logitech Teclados dispositivos móviles Korg Sintetizador Blu Los teléfonos inteligentes AMC Reproductores de cd La Pavoni Cafeteras
  • Yamaha NX-U10BL Sony ICF-CL75IP Hiti S420 Miele CS 1234 Prexiso P50
  • Casio CLASSPAD 330 Ficha de datos Samsung T27B750EW Manual de usuario Liebherr ICN 3366 Premium NoFrost Manual de usuario Lexmark Z42 Manual de usuario IKEA BEJUBLAD Manual de usuario